Spring Repair in Marietta, GA

Every visit starts with

Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included

Your new garage door for as low as $59/month*on approved credit; ask for current terms

You get a price before we start. It does not change when the truck arrives.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Spring Repair in Marietta, GA

Garage door spring repair in Marietta typically costs between $220 and $450, depending on the specific spring wire diameter, the length of the spring, and the cycle rating required for your door. At Servo Garage Doors Marietta, we provide a written, flat-price scope before any work begins, as required by Clause 1 of The Haven Standard. If your garage door has stopped opening or you heard a loud bang in the garage, the torsion spring has likely failed. Our Garage Door Repair services technicians are available to assist you today; call (470) 486-7771 for a transparent quote and same-day service availability.

A broken spring is the most common mechanical failure we encounter. While many companies treat this as a simple swap, we treat it as a calibration of your door’s entire counterweight system. If you are researching Garage Door Repair in Marietta, you will find that our approach focuses on evidence. We do not guess at the spring size. We measure your existing hardware, verify the door weight, and install the correct spring to match your specific system. We serve the entire Marietta area, from the older homes near the Marietta Square to the newer developments in East Cobb, ensuring every door operates safely and quietly.

When You Need Spring Repair

You do not need to be a mechanic to identify a failed spring. The symptoms are distinct and usually happen without warning. If you notice any of the following, your spring system has likely reached the end of its life cycle.

• The Loud Bang: Torsion springs are under immense tension. When they snap, they create a sharp, metallic sound that often mimics a gunshot or a firecracker. This is the sound of the spring releasing all its stored potential energy.
• The Door Won’t Open: If your garage door opener struggles to lift the door or stops moving after a few inches, the spring has failed. The motor is designed to move a balanced door; without the spring’s counterweight, the door is essentially dead weight.
• Visible Gap in the Coil: Torsion springs are tightly wound coils. If you look at the shaft above your door and see a distinct separation or gap between the coils, the metal has snapped.
• Door Feels Heavy: If you pull the emergency release cord and attempt to lift the door manually, it should feel relatively light. If it is nearly impossible to lift, your springs are broken or were never sized correctly for the door weight.
• Door Crooked Movement: If the door rises unevenly or looks like it is binding on one side, it indicates that one spring has failed while the other is still holding tension, or that the cable system has been compromised.

Safety Warning: Please do not attempt to replace a torsion spring yourself. These components are under high-tension and can cause severe injury if mishandled. The hardware supporting the spring, including the center bearing plate and the winding cones, is also under significant stress. Related issues like Track Realignment should also be handled by professionals. If you suspect a spring failure, keep people and vehicles away from the door and call (470) 486-7771 for a professional assessment.

Our Spring Repair Process

We operate under The Haven Standard, which dictates exactly how we handle repairs. We do not provide estimates over the phone that change once we arrive. We arrive, inspect, and present a written price. Here is how our process works on every job:

1. Documented Inspection: Per Clause 4 of The Haven Standard, our technician photographs the failed component before quoting any replacement. You will see exactly what we found.
2. Measurement and Verification: We measure the wire diameter, the inner diameter of the spring, and the length of the coil. We do not rely on guesses. We ensure the new spring matches the specific weight requirements of your door, whether it is a heavy carriage-house door or a standard steel panel.
3. Upfront Written Scope: Before we turn a single wrench, we provide a written price and scope of work. You approve the price, and we execute the repair.
4. System Calibration: Replacing the spring is only half the job. We balance the door, check the cable tension, inspect the rollers, and test the safety sensors to ensure the entire system functions as intended.
5. Photo Record Delivery: Once the work is complete, you receive a documented photo record of the findings and the completed repair. This serves as your paper trail for the work performed.

We service all major brands, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Whether you have a standard sectional door or a custom wood door, we have the parts and the expertise-including Cable Repair capabilities-to get it moving again.

Before

After

Spring Repair Pricing in Marietta

We believe in transparent, no-hassle upfront pricing. We do not use “call for a quote” as a tactic to get our foot in the door; we provide a clear, written price for the labor and parts required. The cost is determined by the cycle rating of the spring-which dictates how many times the door can open and close before the metal fatigues-and the specific hardware needed. See our guide on How Much Does Garage Door Repair Cost? (2026 Price Guide) - Marietta, GA for detailed pricing.

We also offer a Free Second Opinion on any written estimate from another company. If you have a quote from a competitor, bring it to us. We will review the scope and provide our own written price based on our standards. Call (470) 486-7771 to schedule your appointment.

FAQs - Spring Repair

Is it cheaper to repair or replace the garage door springs?

You cannot “repair” a broken spring; once the metal has snapped, the spring must be replaced. We always recommend replacing both springs if you have a dual-spring system, as they have been under the same amount of tension and will likely fail in close succession. Replacing both at once saves you the cost of a second service call.

How long should a garage door spring last?

Most standard springs are rated for 10,000 cycles, meaning they will open and close your door 10,000 times. In a typical Marietta household, this usually translates to 7 to 10 years of use. If you use your garage as your primary entrance, you may see them fail sooner. We can provide higher-cycle springs if you want a longer service life.

Can you perform a spring repair on the same day?

Yes, we prioritize spring repairs because a broken door is a security risk and a significant inconvenience. Our technicians carry a wide range of spring sizes on their trucks, allowing us to complete most repairs on the first visit. Call (470) 486-7771 to check our current schedule for your area.

Do you offer a warranty on your spring repairs?

Yes, we provide our 365-Day Done Right Promise. If the repair is not done right, we make it right. This promise is backed by our adherence to The Haven Standard and our commitment to documented work. You receive a written record of the work, which keeps us accountable for the quality of the repair.

If you are ready to have your garage door fixed the right way, with a written price and a documented record of the work, reach out to us. We are an independently owned and operated business serving Marietta, providing honest, evidence-based service since 2015. We do not use high-pressure sales tactics; we simply provide the technical expertise you need to get your door back in operation. Call (470) 486-7771 for a free estimate or to schedule your service today. You can also visit our home page to learn more about our other services.

Written by Marcus Deller, Owner at Servo Garage Doors Marietta, serving Marietta.