Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterFast, Reliable Garage Door Installation Across Marietta
Garage door installation in Marietta runs $700 to $2,200 for a standard double door, and most full replacements are completed in a single day. We are Servo Garage Doors Marietta, and every job starts with a written price and scope before any work begins - that’s Clause 1 of The Haven Standard, the documentation system our independently owned business has operated under since 2015. Call (470) 486-7771 and you’ll speak with a live person, not a recording, any hour of any day. If you’re in East Cobb, near Marietta Square, or out on acreage past Barrett Parkway, our crews know the roads and the door failures that come with them.
Why Servo Garage Doors Marietta Is Marietta’s Preferred Garage Door Installation Company
Most of our Marietta work is in East Cobb subdivisions built between 1985 and 2005, where entire blocks of builder-grade garage systems are aging out on the same schedule. When one house on the street snaps a torsion spring, the neighbor’s opener drive gear is usually weeks behind. That density means our technicians know exactly which door models were installed in which Indian Hills or East Cobb corridor subdivisions, and what fails on them. Marcus Deller, who leads our local operation, trained our crew to photograph the failed component before quoting a replacement. Clause 4 of The Haven Standard requires it. You see the warped panel, the snapped spring, the stripped gear - before you’re asked to pay for anything.
Homeowners who bought between 2015 and 2025 near Marietta now own garages that are hitting their first major service life. They want the price range on the page, they read reviews before dialing, and they’re more convinced by a documented photo record than by a sales pitch. That’s exactly how we run - the evidence goes to you in writing, with the flat-price scope delivered before the first bolt is loosened. Our Garage Door Installation team handles every job with background-checked, uniformed technicians whose license number sits on the estimate, not buried in fine print.
Our Garage Door Installation Services in Marietta
We install, measure, and spec doors for every housing type in Marietta - from 1950s ranch homes near the Square to five-car garage estates on acreage lots east of Johnson Ferry Road. New door projects always start with a measure, a written scope, and a flat price you approve before the order goes in.
New Door Installation
A new door installation in Marietta typically runs $700 to $2,200 depending on size, material, and opener pairing. We quote the door, the track, the springs, and the labor as one line item, not a base price with add-ons. In East Cobb, where 1990s raised-panel wood doors are now out of plane by an inch or more, we almost always recommend a steel or composite replacement over another spring repair. The math is simple at that point - one full-system replacement beats four spring calls in three years.
Single Car Door
Single car doors are common on the 1950s and 1960s ranch homes around Marietta Square, where garages were often added after original construction. Those additions left non-standard rough openings and odd header heights that won’t accept a stock door. We measure the actual opening, spec a custom jambs-width door, and price it before you commit. You’ll know the exact number that afternoon.
Double Car Door
Double doors dominate East Cobb’s colonial and traditional-style builds from the 1980s onward. These are the structures carrying raised-panel wood doors that have absorbed two decades of Cobb County humidity. When we replace them, we upgrade the spring package to high-cycle torsion springs as standard on heavy doors. The opener works less, the balance stays true, and the new door isn’t pulling your old chain-drive unit to the edge of its duty rating.
Custom Garage Door
For oversized workshop doors on Marietta’s acreage properties, the conversation starts with door weight, drum size, and opener pairing. A door built heavier than a standard sectional needs heavy-duty drums, larger cables, heavier end bearing plates, and an opener rated for the actual load. That combination isn’t a line item on a generic estimate - it’s what we spec when a standard double door won’t survive on a three-car barn opening. Custom garage doors in Marietta run from $700 to $2,200, with exact pricing based on measured size and material.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Marietta
We carry and service all eight major brands, and in Marietta the bulk of our installs are Clopay steel sectionals, Amarr, and Chamberlain openers - those pairings match what East Cobb homes were originally built with and what holds up to local humidity. We also work regularly with Genie. When we know the door going in is a Clopay steel model with a Chamberlain belt-drive running it, our warehouse in the metro area has the parts staged before the truck leaves. No second trip for a missing bracket or wrong track length. You’ll get a documented photo record of the finished job - what was taken out, what went in, and how the opener was set. That’s standard on every visit.
Common Garage Door Installation Problems We See in Marietta Homes
- Warped 1990s raised-panel wood doors in East Cobb. Sustained summer humidity above 70% relative humidity swells these panels over time, throwing the door out of plane and off balance. The result is a torsion spring snapping within six months of a spring-only repair.
- Non-standard rough openings on mid-century ranch homes near Marietta Square. Garages added after the original build frequently have header heights and side clearances that don’t match modern track profiles. A stock double door will not fit without modifying the opening or ordering a custom-width door.
- Oversized workshop doors on acreage parcels. When a door weighs more than a standard sectional, drums, cables, and end bearing plates wear prematurely if paired with a light-duty opener. We spec heavy-duty hardware and heavier springs from the start.
- Winter ice storm damage to door bottoms and springs. Ice freezes the bottom seal to the concrete apron. Forcing the opener through it snaps springs and strips gear-and-sprocket kits - a concentrated failure pattern across Marietta because nearly every suburban home has an attached garage.
Pricing for Garage Door Installation in Marietta, GA
Here’s what a new door installation actually costs in Marietta right now. These are the ranges we quote from, stated as a single line item that includes the door, track, springs, hardware, labor, and haul-away of the old door. The price you’re quoted is the price you pay - written flat, in advance, per Clause 1 of The Haven Standard. No exceptions.
| Door Type | Typical Marietta Range |
|---|---|
| New Door Installation | $700-$2,200 |
| Custom Garage Door | $700-$2,200 |
| Steel Doors | $700-$2,200 |
| Double Car Door | $700-$2,200 |
What moves the price within that band is material (steel is the most common workhorse in Marietta, wood composites run higher), the measured size of the opening, spring cycle rating, and whether you add a new opener at the same time. Every estimate is free, and it’s written - not verbal. Call (470) 486-7771 and we’ll send a technician to measure and deliver a flat price the same visit.
We Also Serve Cities Near Marietta
Our Marietta crews route regularly into Garage Door Installation in Marietta and the surrounding metro communities, including Smyrna, Kennesaw, Powder Springs, and Atlanta. If you’re in any of those areas and need a written quote on a new door or a full-system replacement, the same flat-price scope and documented photo record apply. We’ll schedule a measure that same week.
Serving Marietta, GA - Our Local Coverage Area
We’re based in the Marietta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Garage Door Installation in Marietta
Because the panels themselves are typically warped out of plane by an inch or more after 25 years of Marietta humidity, and warped panels throw off the door’s balance even with brand-new torsion springs installed. The spring then works against the door’s own resistance, shortening its service life to months instead of years. The fix is full panel or door replacement, not another spring swap. If you’re seeing repeated spring failures on an original wood door in East Cobb, we’ll show you the measured warp on site before quoting a replacement. Call (470) 486-7771 for an exact assessment.
In most cases, no. 1950s and 1960s additions near Marietta Square were framed with header heights and side clearances that don’t match modern double-door track profiles. We measure the actual rough opening and quote a custom-width or custom-height door to fit what’s there - you’ll get a written flat price for the custom work, not a sketchy modification upcharge. Estimates are free, and the measurement is documented.
Ask for a high-cycle torsion spring package rated at 25,000 to 30,000 cycles minimum on any new double door in Marietta. Standard builder springs are often 10,000-cycle units, and with the heat and humidity here, they age out faster than the rated number suggests. We spec high-cycle springs on every double door install, and the spring wire size and cycle rating goes into your written scope before work begins. Call (470) 486-7771 and we’ll explain the spring math on your door specifically.
We measure the exact door weight, panel gauge, and opening height, then pair the door with heavy-duty drums, larger cables, and end bearing plates sized for the actual load - plus an opener rated above the door’s duty requirement. A standard residential opener on an oversized workshop door will burn through its gear and logic board quickly. Every oversized job gets a written scope that names the hardware and the load rating, so you see the spec before you pay a dollar.
Replace the door when the panels are warped, split, or water-damaged beyond cosmetic repair, when the track is bent, or when you’ve spent $400 or more on spring work in the past two years and the door still runs rough. In East Cobb specifically, original 1990s raised-panel wood doors have passed the point where component repair makes economic sense - the door itself is the weak link. We’ll show you the failed component and the measured warp, then quote a flat full-door replacement if that’s the right call. The written price comes first.
Written by Marcus Deller, Owner at Servo Garage Doors Marietta.